Learn how to fix broken parts of your toilet such as flappers, fill valves, flush valves and handles.

Your toilet is always there for you. Once you know how to fix the handle, the flush valve, and the fill valve, you'll be able to help in its time of need.

There are several possible solutions to sloppy lever, chain, and flush valve problems. Adjust the flush lever or replace it. If the chain has been disconnected at either end, simply reconnect it.

"It worked!" Home repair pro shares simple tips to stop your toilet from wasting water: 'Very helpful' first appeared on The ...

A toilet flush valve controls the flow of water from the tank into the toilet bowl. It is made of a valve body, a flapper, and a chain. When you flush, the chain lifts the flapper and water flows ...

Mostly likely, you’ll be dealing with a gravity-fed toilet—and luckily, nearly all of your problems can be traced to three parts: the fill valve, the flapper, and the tank lever.

Another cause could be that the flush valve assembly isn’t compatible with the toilet. A tube that’s been cut too short during installation will allow for water to continuously run.

Another cause could be that the flush valve assembly isn’t compatible with the toilet. A tube that’s been cut too short during installation will allow for water to continuously run.

Question: After we flush the toilet, when the tank is almost full, there is a noise. It appears to be the wire and bulb vibrating. Can this be fixed or do we need to get a new valve with parts ...

If you are not sure about buying a new flush valve that's compatible with your toilet, show the old valve to a floor clerk at the hardware store -- he is there to help people with problems exactly ...

The problem is usually with the flapper or flush valve assembly. The flush valve (aka Douglas valve) is what the flapper sits on.